Car Park Line Marking glossary
The terms you'll come across, explained in plain English.
- Aisle
- The driving lane between rows of parking bays. Its width depends on the parking angle and whether traffic flows one way or both ways.
- Angled parking
- Bays set at an angle, often 45 or 60 degrees, to the aisle. It allows narrower one-way aisles and easier entry to bays.
- BS 8300-1:2018
- The British Standard giving guidance on designing accessible external environments, including recommended accessible parking bay sizes and transfer zones.
- Ghost marking
- A faint outline left where an old line has been badly removed or painted over. It can confuse drivers, especially in low sun or wet conditions.
- Glass beads
- Tiny glass spheres dropped onto fresh line markings. They embed in the surface and reflect vehicle headlights back to the driver, making lines visible at night.
- Hand screed
- A box-shaped applicator pushed along the surface to lay molten thermoplastic at a set width and thickness. Used for bays, hatching and junction markings.
- Hatching
- Diagonal or chevron lines marked within an area to show that it must be kept clear, such as transfer zones beside accessible bays or keep-clear areas.
- Keep clear box
- A marked area, often yellow with hatching or text, that must not be blocked, such as in front of gates, fire exits or loading doors.
- Mobilisation
- Bringing the crew, lining vehicle, boilers and materials to site. Its fixed cost is why small jobs carry a minimum charge.
- Preformed symbol
- A factory-made thermoplastic marking, such as a wheelchair, EV or arrow symbol, laid on the surface and heated with a gas torch until it fuses in place.
- Re-lining
- Applying new marking material over existing faded lines in the same positions. Quicker and cheaper than setting out a new layout from scratch.
- Road marking paint
- A liquid coating applied by spray or roller, used on concrete, block paving, decks and temporary layouts where thermoplastic is not suitable.
- Set-out
- Measuring and marking the positions of new bays, arrows and walkways on the surface, usually with string lines and chalk, before any marking material is applied.
- Thermoplastic
- A road marking material supplied as solid blocks, melted in a boiler and applied hot as a thick line. It hardens in minutes and bonds to asphalt.
- Transfer zone
- The extra hatched space beside an accessible parking bay that gives room to open doors fully and transfer to or from a wheelchair.
Get a free car park line marking quote
Tell us what you need and we'll come back with a clear price.
Request a quote