Car Park Line Marking

Car Park Line Marking

Accessible Parking Bays

Correctly sized disabled bays with transfer zones, wheelchair symbols and dropped kerb access, set out to recognised accessibility guidance.

Free Car Park Line Marking quote

No obligation. We only use your details to reply about this job.

Accessible Parking Bays — Car Park Line Marking

What's involved

Accessible bays need more space than standard bays so drivers and passengers can transfer to wheelchairs or use rear-loading ramps. Widely used guidance recommends a bay of 2.4 m by 4.8 m with an additional 1.2 m clear zone alongside and behind, which is usually marked with yellow hatching. The crew positions accessible bays as close as possible to building entrances and on level ground, ideally next to a dropped kerb. The wheelchair symbol is applied in preformed thermoplastic, and bays can be outlined in yellow for visibility. If you want to enforce the bays, signage is needed as well as markings. Converting standard bays to accessible ones usually means losing some standard spaces, so crews can help you redraw the layout to minimise that. Allow a few hours for a handful of bays, and make sure surrounding kerbs and paths are suitable before the markings go down.

How we handle it

  1. Site survey

    A specialist visits or reviews photos and plans to measure the car park, check the surface condition and note existing markings, kerbs, drains and entrances. They ask about opening hours, enforcement and any spaces you need to add.

  2. Layout and quotation

    You receive a quote and, where needed, a layout plan showing bays, arrows, hatching and walkways. It sets out the materials to be used, any line removal needed and how long the work will take.

  3. Planning the closure

    The crew agrees a date and time, often evenings, Sundays or overnight. You notify users, arrange temporary parking if needed and clear vehicles from the areas to be marked on the night.

  4. Preparation and marking

    The surface is swept and dried, old lines removed where needed, and the new layout set out in chalk. Thermoplastic or paint is applied, followed by glass beads for reflectivity and preformed symbols.

  5. Inspection and reopening

    The crew checks line quality, bay sizes and symbol placement with you before leaving. Thermoplastic cools within minutes, so most car parks can reopen as soon as the crew has packed up.

Price guide

Car park line marking is usually priced per bay or per linear metre, with symbols, arrows and hatching priced individually. Re-lining over an existing layout costs less than setting out a new pattern. Out-of-hours work, line removal and small job minimums affect the total. These are typical UK guide prices for 2026.

  • Minimum call-out for small jobs: from £350. Covers mobilisation of the crew, boilers and kit for small car parks or touch-ups.
  • Standard parking bay re-line (thermoplastic): £8–£15 per bay. Re-lining existing white bay lines on sound asphalt; larger jobs get lower rates.
  • New layout set-out and lining: £12–£22 per bay. Includes setting out new bay positions from a plan and applying thermoplastic lines.

Questions about accessible parking bays

What size is a standard UK parking bay?

A standard UK car park bay is commonly 2.4 m wide by 4.8 m long. Some operators use 2.5 m widths to suit larger modern cars. Accessible bays need extra space, usually a 1.2 m transfer zone alongside and behind the bay.

How many accessible bays should a car park have?

There is no single legal number for private car parks, but guidance in BS 8300 recommends a proportion based on the type of building and the total number of spaces, typically around 5 to 6 percent for many public-facing buildings. A specialist can advise based on your site.

Get a free car park line marking quote

Tell us what you need and we'll come back with a clear price.

Request a quote